Water mist flushing system with pressurised tank For Penumatic Crawler Rock Drilling Rigs

DRILL PANGOLIN®
​Water mist flushing system with pressurised tank​

---

DRILL PANGOLIN® Water mist flushing system with pressurised tank​ is an improved method of "damp" drilling, developed for use with track mounted rock drill machines FURUKAWA PCR200-DTH & QIN-PCR200-DTH & ATLAS COPCO AirROC D45 & D50 & CM351 & HAN-D50-DTH to prevent rock dust particles from contaminating the atmosphere during drilling operations. 

This method involves injecting water into the hole blowing air stream so that it is carried to the bottom of the drill hole. When the right amount of moisture is present in the air stream, the dust 
particles are coated in such a way that they form small pellets which will not drift into the atmosphere but will settle around the lip of the hole. 
​
In addition to eliminating a serious health hazard, a notable increase in drilling productivity is realized when the system is installed. The cost of installation is small compared to the increase in production. 

Standard Capacity: 160L​

DRILL PANGOLIN® Damp Dust Control System​

Advantages:

1. Many countries enforce a minimum dust count law that prohibits the use of rock drilling equipment not equipped with devices to protect operating personnel from injurious rock dust with the dust control system installed, the machine will be permitted to operate. 
2. It eliminates the cost involved in supplying, maintaining, and enforcing the use of respirators. 
3. It increases the service life of drill bits. 
4. It reduces the number of broken steels.​
5. The existing air compressor can be used continualy.
6. Air pressure is constant and does not affect the drilling scale.
7. Accurate water pressure regulation system for maximal water saving.
8. No power supply, no electronic parts, long life.

What kind of dust collector should be used in pneumatic crawler drilling rigs?