JACK LEGS JAPAN STANDARD

280LD JACK LEG

280LD Jack Leg

280LD support leg

280LD Jack Leg face drill in underground mine

Drilling Depth : 7.2 - 8m

Unlike conventional jack legs designed primarily for maximum drilling speed, FACE WARRIOR 280LD Jack Leg Rock Drill under Japan standard for underground face drilling, tunnel construction, and rock bolting, features a sound balance between the leg and the drill.
It is designed for underground drilling only. This ensures stabilized operation through a wide range of drilling angles.
Moreover, the leg absorbs the drill vibrations so effectively that the operator can use it for many hours of fast drilling operation without excessive fatigue.
Another feature is the concentration of all controls on the back head of the jack leg. This enables the operator to control the leg drill quickly and easily. The leg is as lightweight as it can be. 

Perfect leg-drill balance
The drill recoil is absorbed by the leg owing to the integral design of the leg and drill, and consideration has been given to produce full power continuously. 

Performance equal to air flushing
The automatic water-feed device and the constant impact and lubricating mechanisms serve to give the same performance as a comparable drill with air flushing. 

Adaptable to long-hole drilling
Long-hole drilling is possible with FACE WARRIOR 280LD's powerful impact mechanism and strong rotating force, and it is equally efficient in drilling also of small-diameter holes. 

Automatic water-feed device
Water is instantly fed automatically as soon as the drill is started by working the throttle valve handle, and is automatically stopped when the drill operation ceases. Powerful blows can be affected by utilizing the same handle. ​

DRILL PANGOLIN 280LD support leg/pusher leg is also fitted in TOYO 280LD jack legs.

Model	Shank Size	Weight (kg)	Length (mm)	Piston Stroke (mm)	Piston Length (mm)	Air Consumption ​(mm3/min)
FW-280LD ​Rock Drill	H22 * 108	30	675	68	76.2	3.5

Model	Weight (kg)	Length (mm)	Extended Length (mm)	Feed Length (mm)	Feed Cylinder Dia (mm)	Fitted Drill
FW-280LD support leg pusher leg	15.2	1750	2960	1210	62	TOYO 280LD ​ JACK LEG