PCR200 DTH pneumatic crawler rock drilling rig
QIN-PCR200-DTH PNEUMATIC CRAWLER ROCK DRILLING RIG
Hole Diameter : 89-165 mm / 3.5-6.5 inch
Average Speed : 60-90 seconds per rod (rod length 3m)
Average Speed : 60-90 seconds per rod (rod length 3m)
PCR200-DTH
|
|
PCR200-DTH POWERFUL PARTS
QIN-PCR200-DTH 7.0 VERSION TECHNICAL UPGRADE
【2021】The main regulator is next to the lubricator for easier checking and adjusting.
【2021】Water spray dust removing control system to adjust the water volume.
|
【2021】Add rotary regulator & feed regulator to prolong the life of rotary head & feed motor
BEYOUND THE CLASSICPAY TRIBUTE TO THE LEGEND
|
【2021】Upgraded atomized lubricator. Its quality is more stable,easier maintenance.
【2021】The classic Japanese design has been retained.
|
Clamp device for horizontal drilling (Option)When the ordinary DTH pneumatic crawler drilling rig carries on the horizontal drilling, will appear the borehole deviation problem.To solve this problem, our R& D team added a drill rod clamping device to QIN-PCR200-DTH pneumatic crawler drilling rig to ensure accurate horizontal drilling.
|
|
Water spray dust removal system （Option）Standard Capacity: 160L
Advantages:
|
DRILL PANGOLIN® Research Institute has developed a water spray dust removal system for the unique pneumatic driven of DTH pneumatic crawler drilling rig, which can effectively prevent harmful dust to the human respiratory system during drilling.
|
Air CompressorDRILL PANGOLIN & LIUTECH teamed up to manufacture an air compressor matching KHITAN series hydraulic crawler drilling rig, reaching the drilling target of No Fastest Only Faster.
LIUTECH as a multinational compressor supplier ATLAS COPCO group, a wholly owned company in China manufacturing, is a company specializing in the production of screw air compressor and its post-processing equipment manufacturer, has been committed to provide users with the compressed air system solutions. |
|
|
"The PCR200-DTH is one of the world's classic DTH pneumatic crawler drilling rig, DRILL PANGOLIIN® is fully inheriting and exceeding its outstanding quality.” - J.C.WARRON | MSD MINING CONTRACTING LTD | KENYA |
|
Official Technical Data of QIN-PCR200 DTH pneumatic crawler rock drill
Model |
QIN-PCR200 DTH Pneumatic Crawler Rock Drill Rig |
Hole Diameter |
89-165 mm / 3.5-6.5 inch |
Total length (mm) |
6,100 |
Total width (incl.operator pedal) (mm) |
2,360 |
Total width (excl.operator pedal) (mm) |
2,200 |
Total height (main boom down) (mm) |
2,105 |
Total track length (mm) |
2,580 |
Total track length on ground (mm) |
1,885 |
Track width (mm) |
310 |
Weight (kg) |
5400 |
Minimum ground clearance (mm) |
250 |
Travel speed (km/h) |
0 ～ 3.5 |
Power of traveling motor (KW) |
8.8 * 2 |
Grade-ability (°) |
35 |
Swing angle (°) |
13 |
Rotary head |
Rotary gearbox & Air motor (gear type) |
Slewing weight (KG) |
219 |
Max. rotary torque (KN-m) |
2 |
Pneumatic motor power(kW) |
3.7 |
Water tank capacity (option) |
160L |
Hydraulic pump pressure (Mpa) |
14.7 |
Hydraulic oil tank (L) |
53 |
Rod diameter×length (mm) |
φ76, φ89 ×3,000 |
Maximum wind pressure (Mpa) |
2.5 |
Suggested air amount (m³/min) |
21-25 |
Hose connector |
Rc 2 in. |
Internal lubricating oil (L) |
Gear oil, approximately 8 |
Total length of slide frame (mm) |
5,420 |
Length of drill boom (mm) |
1,912 |
Propulsion length (mm) |
3,980 |
Max. propulsion force (kN) |
11 |
Swing angle of sliding frame (°) |
Left 4 / Right 54 |
Power of feed motor (kW) |
3.8 |
Drill boom pitching (°) |
Up 46 / Down 23 |
Drill boom swing (°) |
Left 40 / Right 40 |
DTH Hammer-Drill Rod-Drill Bit
