|
Furukawa PCR200DTH-II pneumatic crawler rock drill (Genuine)Outstanding Drilling Performance over 20 years worldwide
Genuine Furukawa PCR200DTH-II advanced design of the boom and hydraulic system assures outstanding versatility and high performance for handling all types of drilling operations. Road construction, dam work, open area drilling, open-pit mining,open cast mines, quarrying operations, tunneling and other drilling operations are all performed with unsurpassed efficiency. Borehole Diameter : 89-140 mm / 3.5-5.5 inch Fuel Consumption : 18L/hour Depth : 30-60m/hour (according to rock hardness) |
Furukawa PCR200DTH-II rotary head assy
|
|
Furukawa PCR200DTH-II pneumatic crawler rock drill dimension
|
|
|
Furukawa PCR200DTH-II pneumatic crawler rock drill
|
|
|
Available stock of Furukawa PCR200DTH-II pneumatic crawler rock drill
|
|
Official Technical Data of Furukawa PCR200DTH-II pneumatic crawler drill
Model |
Furukawa PCR200DTH-II Pneumatic Crawler Rock Drill |
Bore Hole Diameter |
89-140 mm / 3.5-5.5 inch |
Total length (mm) |
6,100 |
Total width (incl.operator pedal) (mm) |
2,360 |
Total width (excl.operator pedal) (mm) |
2,200 |
Total height (main boom down) (mm) |
2,105 |
Total track length (mm) |
2,580 |
Total track length on ground (mm) |
1,885 |
Track width (mm) |
310 |
Weight (kg) |
5400 |
Minimum ground clearance (mm) |
250 |
Travel speed (km/h) |
0 ～ 3.5 |
Power of travel motor (KW) |
8.8 * 2 |
Grade-ability (°) |
35 |
Swing angle (°) |
13 |
Rotary head |
Reducer・pneumatic motor |
Slewing weight (KG) |
219 |
Max. rotary torque (KN-m) |
2 |
Pneumatic motor power(kW) |
3.7 |
Water consumption (L/min) |
46 |
Hydraulic pump pressure (Mpa) |
14.7 |
Hydraulic oil tank (L) |
53 |
Rod diameter×length (mm) |
φ76, φ89 ×3,000 |
Maximum wind pressure (Mpa) |
2.5 |
Suggested air amount (m³/min) |
25 |
Hose connector |
Rc 2 in. |
Internal lubricating oil (L) |
Gear oil, approximately 8 |
Total length of slide frame (mm) |
5,420 |
Length of drill boom (mm) |
1,912 |
Propulsion length (mm) |
3,980 |
Max. propulsion force (kN) |
11 |
Swing angle of sliding frame (°) |
Left 4 / Right 54 |
Power of propulsion motor (kW) |
3.8 |
Drill boom pitching (°) |
Up 46 / Down 23 |
Drill boom swing (°) |
Left 40 / Right 40 |
Air compressor matching
SULLAIR air compressor RH600
|
AIRMAN air compressor PDS750S
|
DTH Hammer-Drill Rod-Drill Bit
